No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei Server Maintenance Manual 09

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Changing the User Password (password)

Changing the User Password (password)

Function

The password command is used to change the user password.

Format

ipmcset -d password -v username

Parameters

Parameter

Description

Value

username

Indicates the existed user whose password is to be changed.

-

Usage Guidelines

You can change the passwords with different complexities based on whether the password complexity check function is enabled (queried using passwordcomplexity command).

  • When the password complexity check function is disabled, the password can be empty or a string of any characters less than 20 characters.
  • When the password complexity check function is enabled, the password must meet the following requirements:
    • Must contain 8 to 20 characters.
    • Must contain at least one space or one of the following special characters:

      `~!@#$%^&*()-_=+\|[{}];:'",<.>/?

    • Must contain at least two types of the following characters:
  • Letters: a to z
  • Letters: A to Z
  • Digits: 0 to 9
    • Must not be the user name or the user name in reverse order.

Administrators have the right to change the passwords of all users, and operators and common users have the permission to change only their own passwords. While changing the passwords, the password of the current user is needed.

Example

# Change the password of user.

iBMC:/->ipmcset -d password -v user
Input your password:
New password:
Confirm password:
Set user password successfully.
Translation
Download
Updated: 2019-02-25

Document ID: EDOC1000041338

Views: 70855

Downloads: 3780

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next