No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei Server Maintenance Manual 09

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Do I View the Physical Partitioning of a Server Through Logs?

How Do I View the Physical Partitioning of a Server Through Logs?

Question

How do I view the physical partitioning of a server through logs?

Answer

You can view the physical partitioning in the partition.cfg file stored in the \one_touch_info_all\smm\infoCollect directory.

As shown in the following figure, Id specifies the SN of a physical partition, Name specifies the name of the physical partition, and Contain specifies the blade/BPU resources contained in the physical partition. Convert the value of Contain into a binary number, whose bit 0 to bit 7 correspond to blade1 to blade8, and 1 indicates that the corresponding blade is included in the partition. For example, if the value of Contain is 8, which is 0000 1000 in binary mode, the physical partition contains only blade4 and is a 4-socket partition.

The following figure shows the mapping between blades and BPUs.

Translation
Download
Updated: 2019-02-25

Document ID: EDOC1000041338

Views: 70734

Downloads: 3780

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next