No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei Server Maintenance Manual 09

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Error Message Is Displayed When RHEL 6.8 Is Restarted After Installation

Error Message Is Displayed When RHEL 6.8 Is Restarted After Installation

Problem Description

None

Symptom

When Red Hat Enterprise Linux (RHEL) 6.8 is restarted after installation, the error message shown in the following figure is displayed.

Key Process and Cause Analysis

Cause Analysis:

When RHEL 6 boots over UEFI, Trusted Boot (tboot) is not supported. For details, visit the Red Hat knowledge base.

https://access.redhat.com/articles/186583

https://access.redhat.com/articles/2217041

The KunLun supports only UEFI boot. If you manually select tboot (as shown in the following figure) during the OS installation, the preceding error message is displayed when the OS is started after the installation.

Conclusion and Solution

Solution:

  1. To use tboot, the Legacy boot must be used.
  2. If only the UEFI boot is available (for example, KunLun servers), do not select tboot during OS installation.

Experience

None

Note

None

Translation
Download
Updated: 2019-02-25

Document ID: EDOC1000041338

Views: 70482

Downloads: 3773

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next