No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei Server Maintenance Manual 09

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Do I Switch Between Two 4-Socket Physical Partitions in the Same SCE for the USB and VGA Ports on the Front Panel of an SCE?

How Do I Switch Between Two 4-Socket Physical Partitions in the Same SCE for the USB and VGA Ports on the Front Panel of an SCE?

Question

How do I switch between two 4-socket physical partitions in the same SCE for the USB and VGA ports on the front panel of an SCE?

Answer

By default, the USB and VGA ports on the front panel belong to BPU A, that is, the 4-socket physical partition on the left.

To switch the ports to BPU B (the 4-socket physical partition on the right), run the smmset -l bladeN -d interface -v 1 command. In this command, N indicates the blade SN. Figure 6-17 shows the mapping between the blades and BPUs.

Figure 6-17 Mapping between the blades and BPUs
Translation
Download
Updated: 2019-02-25

Document ID: EDOC1000041338

Views: 70607

Downloads: 3777

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next