No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei Server Maintenance Manual 09

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Logging In to the RMC CLI

Logging In to the RMC CLI

Scenarios

Log in to the rack management controller (RMC) CLI.

Two login methods are available:

  • Over Secure Shell (SSH)

    The Secure Shell (SSH) protocol provides secure remote login and other secure network services over an insecure network.

    To log in to the RMC CLI over SSH, connect a PC to the RMC management network port by using a network cable.

  • Over the local serial port

Conditions

The RMC is operating properly.

Data

You have obtained the following data:

  • IP address of the RMC management network port. The default IP address is 192.168.2.100.
  • RMC user names and passwords.

    The RMC provides four default users:

    • User root (default password: Huawei12#$)
    • User admin (default password: Huawei12#$)
    • User operator (default password: Huawei12#$)
    • User taobao (default password: Huawei12#$)

Tools

A terminal tool (for example, PuTTY.exe) has been installed on the PC. PuTTY.exe is a piece of third-party free software. PuTTY 0.60 or later is required for login over a serial port.

Documents

For details about the RMC, see X8000 Server RMC Command Reference.

Logging In to the RMC CLI Over a Serial Port

  1. Connect the PC to the RMC serial port by using a serial cable.
  2. On the PC, double-click PuTTY.exe.

    The PuTTY Configuration window is displayed.

  3. Select Serial for Connection type. See Figure 3-36.

    Figure 3-36 PuTTY Configuration (Serial)

  4. Set the login parameters.

    The following are examples:

    • Serial line to connect to: COM1
    • Speed (baud): 38400
    • Data bits: 8
    • Stop bits: 1
    • Parity: None
    • Flow control: None

  5. Click Open.

    The PuTTY window is displayed.

  6. Enter a user name and password as prompted.

    If the login is successful, the RMC command prompt root@RMC:/ is displayed.

Logging In to the RMC Over the Management Network Port

  1. Connect the PC to the RMC management network port by using a network cable.
  2. On the PC, double-click PuTTY.exe.

    The PuTTY Configuration window is displayed.

  3. Select SSH for Connection type. See Figure 3-37.

    Figure 3-37 PuTTY Configuration (SSH)

  4. In the Host Name (or IP address) text box, enter the IP address of the RMC management network port.
  5. Click Open.

    The PuTTY window is displayed.

  6. Enter a user name and password as prompted.

    If the login is successful, the RMC command prompt root@RMC:/ is displayed.

Translation
Download
Updated: 2019-02-25

Document ID: EDOC1000041338

Views: 82940

Downloads: 3889

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next