No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Huawei Server Maintenance Manual 09

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
CMC WebUI Login Failure Caused by Multiple CMC CLI Login Failures over SSH

CMC WebUI Login Failure Caused by Multiple CMC CLI Login Failures over SSH

Problem Description

Table 5-258 Basic information



Source of the Problem

KunLun 9008

Intended Product

KunLun 9008/9016/9032

Release Date



CMC WebUI login failure


A user fails to log in to the CMC CLI over SSH for multiple times. (More than five times. The password is correct, and the password has not been changed.)

Figure 5-329 Failed to log in to the CMC CLI over SSH

Attempt to log in to the CMC WebUI. The login fails, and the system displays a message indicating that the user name or password is incorrect.

Figure 5-330 CMC WebUI login failure

Key Process and Cause Analysis

The failure message of the SSH login shows that the login is denied, and the login failure is not caused by incorrect password. On the CMC WebUI, choose System Management > System Configuration > Security Policy. On the Security Policy page, User root SSH Remote Login is disabled. If the login is denied for more than five times, the login to the CMC WebUI will be locked for 5 minutes.

Figure 5-331 SSH login switch

Conclusion and Solution

Solution: Shut down the SSH client and wait for more than 5 minutes. Log in to the CMC WebUI again, and enable User root SSH Remote Login.





Updated: 2019-02-25

Document ID: EDOC1000041338

Views: 82913

Downloads: 3889

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next