No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Huawei Server Maintenance Manual 09

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Using the Fault Diagnosis LED to Locate Faults

Using the Fault Diagnosis LED to Locate Faults

The following servers support the fault diagnosis LED: RH1288 V3, RH2288 V3, RH2288H V3, RH5885 V3, 5288 V3, 1288H V5, 2288H V5 and 2488 V5. Table 3-31 describes the statuses of the fault diagnosis LED and their meanings. Figure 3-9 shows the location of the fault diagnosis LED on the RH1288 V3. Find the handling methods in the alarm handling manual according to the error code displayed on the fault diagnosis LED.

Table 3-31 Fault diagnosis LED

Module Name

Displayed Information



Fault diagnosis LED


The server is operating properly.


Error code

A component fault has occurred.

For details about a fault code, see "Error Code Handling" in Huawei Rack Server iBMC Alarm Handling.

Figure 3-9 Location of the fault diagnosis LED

Updated: 2019-02-25

Document ID: EDOC1000041338

Views: 71494

Downloads: 3786

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next