No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CX11x, CX31x, CX710 (Earlier Than V6.03), and CX91x Series Switch Modules V100R001C10 Configuration Guide 12

The documents describe the configuration of various services supported by the CX11x&CX31x&CX91x series switch modules The description covers configuration examples and function configurations.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
About This Document

About This Document

Purpose

The documents describe the configuration of various services supported by the CX11x&CX31x&CX710&CX91x series switch modules The description covers configuration examples and function configurations.

This document does not describe how to configure the CX311 FCoE gateway and the CX911, CX912 or CX915 FC switching plane.
The product features and commands for the Ethernet switching plane of the switch modules vary according to the software version. For details, see the documents listed in the following table.
NOTE:

Run the display version command in the switching plane CLI and select a reference document based on the Switch Version or Software Version displayed in the command output.

Huawei Support Website Version

Ethernet Switching Plane Software Version

Reference Document

V100R001C00 or V100R001C00SPCxxx

1.1.0.200.3

See the CX110&CX31x Series Switch Modules V100R001C00 Configuration GuideCX110&CX31x Series Switch Modules Configuration Guide (V100R001C00) or CX91x Series Switch Modules V100R001C00 Configuration Guide.

1.1.3.100.3

1.1.3.300.3

1.1.3.300.5

1.1.3.301.6

1.1.3.330.13

1.2.1.0.19

1.2.1.0.21

2.23

2.26

2.29

V100R001C10 or V100R001C10SPCxxx

1.2.1.0.39

See this document.

Versions in the x.xx format, except 2.23, 2.26, and 2.29.

NOTE:

2.05 and later versions are displayed in the x.xx format.

Intended Audience

This document is intended for:

  • Data configuration engineers
  • Commissioning engineers
  • Network monitoring engineers
  • System maintenance engineers

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Command Conventions

The command conventions that may be found in this document are defined as follows.

Convention

Description

Boldface

The keywords of a command line are in boldface.

Italic

Command arguments are in italics.

[ ]

Items (keywords or arguments) in brackets [ ] are optional.

{ x | y | ... }

Optional items are grouped in braces and separated by vertical bars. One item is selected.

[ x | y | ... ]

Optional items are grouped in brackets and separated by vertical bars. One item is selected or no item is selected.

{ x | y | ... }*

Optional items are grouped in braces and separated by vertical bars. A minimum of one item or a maximum of all items can be selected.

[ x | y | ... ]*

Optional items are grouped in brackets and separated by vertical bars. Several items or no item can be selected.

&<1-n>

The parameter before the & sign can be repeated 1 to n times.

#

A line starting with the # sign is comments.

Interface Numbering Conventions

Interface numbers used in this manual are examples. In device configuration, use the existing interface numbers on devices.

Security Conventions

  • Password setting
    • When configuring a password in plain text, the password is saved in the configuration file in plain text. The plain text has high security risks. The cipher text is recommended. To ensure device security, change the password periodically.
    • When you configure a password in cipher text that starts and ends with %@%@ (the password can be decrypted by the device), the password is displayed in the same manner as the configured one in the configuration file. Do not use this setting.
  • Encryption algorithm

    Currently, the device uses the following encryption algorithms: DES, 3DES, AES, RSA, SHA1, SHA2, and MD5. DES, 3DES, RSA and AES are reversible, and SHA1, SHA2, and MD5 are irreversible. The encryption algorithm depends on actual networking. If protocols are used for interconnection, the locally stored password must be reversible. And the irreversible encryption algorithm must be used for the administrator password.

  • Personal data

    Some personal data may be obtained or used during operation or fault location of your purchased products, services, features, so you have an obligation to make privacy policies and take measures according to the applicable law of the country to protect personal data.

  • Remote access
    • The Telnet protocol is not secure. Data is not encrypted during transmission over Telnet. Therefore, transmitted data may be restored after IP packets are captured without authorization. It is recommended that files be transmitted over SSH.
    • The FTP and TFTP protocol is not secure. Data is not encrypted during transmission over FTP and TFTP. Therefore, transmitted data may be restored after IP packets are captured without authorization. It is recommended that files be transmitted over SFTP.
  • The terms mirrored port, port mirroring, traffic mirroring, and mirroing in this manual are mentioned only to describe the product's function of communication error or failure detection, and do not involve collection or processing of any personal information or communication data of users.
  • Budong setting

    To ensure secure service application, periodically upgrade the switch module software version.

Change History

Issue

Date

Description

12

2019-08-02

This issue is the twelfth official release.

11

2018-11-19

This issue is the eleventh official release.

10

2017-09-04

This issue is the tenth official release, and includes the following changes:
  • Deleted information about ISSU.
  • Deleted information about support for 10M and 100M.
  • Added a note to section "Specifying Master and Slave Interfaces in a Smart Link Group".

09

2017-03-27

This issue is the ninth official release, and includes the following changes:

08

2016-11-30

This issue is the eighth official release.

07

2016-03-31

This issue is the seventh official release, and includes the following changes:

Added a note to Mirroring Configuration, Configuring Remote Port Mirroring, and Configuring Remote Traffic Mirroring to indicate that switch module 5.13 and later versions do not support remote port mirroring and remote traffic mirroring.

06

2015-07-17

This issue is the sixth official release.

05

2015-02-16

This issue is the fifth official release, and includes the following changes:

Added the Exporting the Configuration File (Version of the MM910 Is 3.30 or Later) and Loading the Configuration File (Version of the MM910 Is 3.30 or Later).

04

2014-11-10

This issue is the fourth official release, and includes the following changes:

Added the configurations related to the CX710.

03

2014-09-15

This issue is the third official release.

02

2014-07-30

This issue is the second official release, and includes the following changes:

Updated the document name.

01

2014-04-08

This issue is the first official release.

Translation
Download
Updated: 2019-08-09

Document ID: EDOC1000041694

Views: 19172

Downloads: 3551

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next