No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CX11x, CX31x, CX710 (Earlier Than V6.03), and CX91x Series Switch Modules V100R001C10 Configuration Guide 12

The documents describe the configuration of various services supported by the CX11x&CX31x&CX91x series switch modules The description covers configuration examples and function configurations.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
First Login Overview

First Login Overview

To configure a device that is powered on for the first time, log in to the device through the console port or SOL.

The switch module provides a baseboard management controller (BMC) serial port and a SYS serial port. The ports comply with RS232.
  • BMC serial port: The port is used to log in to the BMC command-line interface (CLI).
  • SYS serial port: The port is used to manage, maintain, and debugswitching planes.

This topic describes how to perform local configuration for a device after connecting a terminal serial port directly to the device SYS serial port (console port), and logging in to the device. For details about how to log in to the device over SOL, see Logging In to the Device Through SOL.

Updated: 2019-08-09

Document ID: EDOC1000041694

Views: 58642

Downloads: 3621

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next