Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Default Configuration
This section describes the default LLDP configuration.
Table 14-21 describes the default LLDP configuration.
Table 14-21 Default LLDP configuration
Parameter |
Default Setting |
|---|---|
LLDP |
Disabled globally |
Interval between sending LLDP packets |
30 seconds |
Delay in sending LLDP packets |
2 seconds |
Hold time multiplier of device information on neighbors |
4 |
Delay in initializing interfaces |
2 seconds |
Delay in sending a notification after neighbor information changes |
5 seconds |
the Number of LLDP Packets Quickly Sent by the Device to a Neighbor |
4 |
Type of the type-length-values (TLVs) that an interface can send |
All types of TLVs except the DCBX and Location Identification TLV |
Previous
