No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CX11x, CX31x, CX710 (Earlier Than V6.03), and CX91x Series Switch Modules V100R001C10 Configuration Guide 12

The documents describe the configuration of various services supported by the CX11x&CX31x&CX91x series switch modules The description covers configuration examples and function configurations.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
File system

File system

Access the BIOS menu and select 5 to access the file system submenu.The following example shows information displayed on a CX91x series switch module 10GE switching plane. Information displayed on your device may be different.

        BIOS Menu (Version: 038)

     1. Continue to boot
     2. Update from serial interface
     3. Update from ethernet interface
     4. Modify startup parameters
     5. File system
     6. Modify BIOS password
     7. Modify console password
     8. Rollback from VRPv8 to VRPv5
     9. Reboot

Enter your choice(1-9): 5

        File system Submenu   
  
     1. List flash files     
     2. Upload file to server
     3. Return       
  
Enter your choice(1-3): 
Table 1-100 File system submenu

Item

Description

1. List flash files

Displays all files in the flash memory.

2. Upload file to server

Backs up files to the server through the Ethernet interface.

You can select this item to back up configuration files and patch files in the storage medium before formatting the storage medium.

3. Return

Returns to the BIOS main menu.

Upload file to server

Enter the file system submenu and select 2 to access the submenu for uploading files to the server.

        File system Submenu   
  
     1. List flash files     
     2. Upload file to server
     3. Return       
  
Enter your choice(1-3): 2
Please check network paraments:
'.' = clear field;  '-' = go to previous field;  Ctrl+C = quit
FTP type            : TFTP             
Server IP address   : 192.168.1.11     -
Switch IP address   : 192.168.1.121    -
Gateway IP address  : 192.168.1.1      -
Network Mask        : 255.255.255.0    -

Please input file name:  software.cc

Before uploading files in the storage medium to the device, check files in the storage medium by referring to 1. List flash files and set Ethernet interface parameters.

Translation
Download
Updated: 2019-08-09

Document ID: EDOC1000041694

Views: 58574

Downloads: 3621

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next