No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CX11x, CX31x, CX710 (Earlier Than V6.03), and CX91x Series Switch Modules V100R001C10 Configuration Guide 12

The documents describe the configuration of various services supported by the CX11x&CX31x&CX91x series switch modules The description covers configuration examples and function configurations.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).


This section describes how to monitor and clear alarms.

Clearing Alarms


The cleared alarm statistics cannot be restored. Confirm the action before you run the command.


  • Clears hardware alarms.

    • Run:

      clear device alarm hardware { all | index index | slot slot-id } { no-trap | send-trap }

      Hardware alarms are cleared.

  • Clearing active alarms or alarm statistics.

    1. Run:


      The system view is displayed.

    2. Run:


      The alarm view is displayed.

    3. Clearing alarms

      • Run:

        clear alarm active { all | sequence-number sequence-number }

        Active alarms are cleared.

      • Run:

        clear alarm history { all | sequence-number sequence-number }

        Historical alarms are cleared.

      • Run:

        reset statistics [ name alarm-name ]

        The alarm statistics are cleared.

Monitoring Alarms


  • Run:

    display alarm active [ verbose ]

    Active alarms are displayed.

  • Run:

    display alarm active root [ verbose ]

    Active root alarms are displayed.

  • Run:

    display alarm information [ name alarm-name ]

    The alarm configuration is displayed.

  • Run:

    display alarm statistics [ name alarm-name ]

    The alarm statistics are displayed.

  • Run:

    display device alarm hardware [ slot slot-id ]

    The hardware alarms on the device are displayed.

  • Run:

    display alarm history [ verbose ]

    The historical alarms are displayed.

Updated: 2019-08-09

Document ID: EDOC1000041694

Views: 57470

Downloads: 3619

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next