No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CX11x, CX31x, CX710 (Earlier Than V6.03), and CX91x Series Switch Modules V100R001C10 Configuration Guide 12

The documents describe the configuration of various services supported by the CX11x&CX31x&CX91x series switch modules The description covers configuration examples and function configurations.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Reliability Specifications

Reliability Specifications

The Mean Time Between Failures (MTBF) and Mean Time to Repair (MTTR) are used to evaluate system reliability.

MTBF

The MTBF refers to the average time (usually expressed in hours) when a component or a device works without any failure. A larger value of the MTBF indicates higher reliability.

MTTR

The MTTR refers to the average time that a component or a device will take to recover from any failure. MTTR also involves device management and customer service, and is an important specification for device maintenance.

MTTR = Fault detection time + Hardware replacement time + System initialization time + Link recovery time + Route convergence time + Forwarding recovery time

A smaller value of MTTR indicates higher reliability.

Translation
Download
Updated: 2019-08-09

Document ID: EDOC1000041694

Views: 58777

Downloads: 3621

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next