No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CX11x, CX31x, CX710 (Earlier Than V6.03), and CX91x Series Switch Modules V100R001C10 Configuration Guide 13

The documents describe the configuration of various services supported by the CX11x&CX31x&CX91x series switch modules The description covers configuration examples and function configurations.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Introduction to Fault Management

Introduction to Fault Management

This section describes the definition and functions of fault management.


Fault management efficiently manages and reports alarms generated on a device in a centralized manner.


The network expands and becomes more complex. When a module on a device is faulty, a great number of alarms may be generated on one or more devices. The alarms, however, may be lost when being sent to the NMS due to limited capability of handling alarms on the devices or the NMS. As a result, certain needed alarms cannot be displayed, which inconveniences network management.

To collect valid fault information on the NMS in an efficient way, configure the alarm severity and alarm reporting delay function to efficiently manage and report alarms in a centralized manner.

Updated: 2019-12-13

Document ID: EDOC1000041694

Views: 60298

Downloads: 3623

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next