Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuration Notes
NetStream and sFlow cannot be configured on the same device.
sFlow does not support sampling of protocol packets processed by CPU.
sFlow does not support sampling for IPv6 multicast packets.
When sampling outgoing packets, the device does not record source VLAN information in the packets. The VLAN information is invalid in the flow table and command output.
sFlow sampling is on the basis of original packets. After the forwwarding behavior is modified (for example, policy routing is applied) or information about the packets to be forwarded is modified (for example, ACL or QoS is applied), the modification cannot be shown in the sFlow statistics.
Previous
