No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CX11x, CX31x, CX710 (Earlier Than V6.03), and CX91x Series Switch Modules V100R001C10 Configuration Guide 12

The documents describe the configuration of various services supported by the CX11x&CX31x&CX91x series switch modules The description covers configuration examples and function configurations.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).


This section describes the applicable scenario of DCB.

FCoE converges LANs and SANs of data centers. Access switches are often deployed between servers and FCFs to reduce investments. As shown in Figure 10-56, SwitchA functions as an access switch and needs to forward LAN, SAN, and IPC traffic. On SwitchA, DCB is configured to guarantee QoS of LAN, SAN, and IPC traffic. The two links ServerA->Switch A->FCF A->Array and ServerA->Switch B->FCF B->Array ensure link reliability between ServerA and the array.

Figure 10-56 FSB networking
Updated: 2019-08-09

Document ID: EDOC1000041694

Views: 57972

Downloads: 3621

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next