No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CX11x, CX31x, CX710 (Earlier Than V6.03), and CX91x Series Switch Modules V100R001C10 Configuration Guide 13

The documents describe the configuration of various services supported by the CX11x&CX31x&CX91x series switch modules The description covers configuration examples and function configurations.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Maintaining the Information Center

Maintaining the Information Center

This section describes how to maintain the information center.

Clearing Statistics

Context

Statistics of the information center cannot be restored after you clear them. Exercise caution when running the commands.

Procedure

  • To clear the statistics of the information center, run the reset info-center statistics command in the user view.
  • To clear the statistics in the log buffer, run the reset logbuffer command in the user view.
  • To clear the statistics in the trap buffer, run the reset trapbuffer command in the user view.

Monitoring the Information Center

Procedure

  • Run the display info-center command to view output configuration of the information center.
  • Run the display info-center statistics command to view statistics of the information center.
  • Run the display logbuffer command to view logs recorded in the log buffer.
  • Run the display logfile file-name [ offset ] command to view the log file.
  • Run the display trapbuffer [ size value ] command to view traps recorded in the trap buffer.
Translation
Download
Updated: 2019-12-13

Document ID: EDOC1000041694

Views: 60927

Downloads: 3623

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next