No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CX11x, CX31x, CX710 (Earlier Than V6.03), and CX91x Series Switch Modules V100R001C10 Configuration Guide 12

The documents describe the configuration of various services supported by the CX11x&CX31x&CX91x series switch modules The description covers configuration examples and function configurations.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring System Startup Files

Configuring System Startup Files

Specify the system software and configuration file for system startup so that the device will start and initialize with the specified software and configuration file. Specify new patch file if the system needs to load new patches.

Pre-configuration Tasks

Before configuring the system startup files, complete the following tasks:
  • Starting the device and logging in to the device locally or remotely.
  • Saving the startup files in the root directory of the device.

Context

Before specifying the files for next startup, you can run the display startup command to view the specified files for next startup.
  • If no system software is specified for next startup, the device will start with current system software. To change the system software to be loaded for next startup (during an upgrade for example), upload the new system software to the device and specify it as the system file for next startup. The system software package must use .cc as the file name extension and be saved to the root directory of the storage device.
  • If no configuration file is specified for next startup, the device will start with the default configuration file (vrpcfg.zip for example). If no configuration file is stored in the default directory, the device uses the default parameters for initialization. The configuration file name extension must be .cfg, .dat, or .zip. In addition, the configuration file must be saved to the root directory of the storage device.
  • A patch file uses .pat as the file name extension. The specified patch file to be loaded for next startup must also be saved to the root directory of the storage device.

Procedure

  • Run:

    startup system-software system-file

    The system software to be loaded for next startup is specified.

  • Run:

    startup saved-configuration configuration-file

    The configuration file for next startup is specified.

    The device reads the configuration file from the root directory of the storage device for initialization when powered on.

  • (Optional) Run:

    startup patch patch-name { all | slot slot-id }

    The patch file for next startup is specified.

Checking the Configuration

After the configuration is complete, run the display startup command to view the system software, configuration file and patch file for next startup.

Translation
Download
Updated: 2019-08-09

Document ID: EDOC1000041694

Views: 58559

Downloads: 3621

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next