No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CX11x, CX31x, CX710 (Earlier Than V6.03), and CX91x Series Switch Modules V100R001C10 Configuration Guide 12

The documents describe the configuration of various services supported by the CX11x&CX31x&CX91x series switch modules The description covers configuration examples and function configurations.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Default Configuration

Default Configuration

This topic describes the default settings of common parameters.

Table 14-5 lists the default settings of SNMP parameters.
Table 14-5 Default settings of SNMP parameters

Parameter

Default Value

SNMP agent

The SNMP agent function is disabled.

SNMP trap receive host

No host is configured to receive traps.

SNMP version

SNMPv3.

SNMPv3 authentication mode and encryption mode

No authentication and no encryption.

Translation
Download
Updated: 2019-08-09

Document ID: EDOC1000041694

Views: 57348

Downloads: 3617

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next