No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CX11x, CX31x, CX710 (Earlier Than V6.03), and CX91x Series Switch Modules V100R001C10 Configuration Guide 12

The documents describe the configuration of various services supported by the CX11x&CX31x&CX91x series switch modules The description covers configuration examples and function configurations.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Resetting a Device

Resetting a Device

When a device fails to be upgraded or cannot work properly, you may need to reset the device.

Context

NOTE:

Resetting a device will interrupt services on the device. When a device is not working properly, to prevent services from being affected, rectify the fault rather than reset the device.

Procedure

  1. (Optional) Run:

    display device [ slot slot-id | all ]

    The device status is displayed.

  2. Run:

    reset slot slot-id

    The device is reset.

Translation
Download
Updated: 2019-08-09

Document ID: EDOC1000041694

Views: 59803

Downloads: 3623

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next