No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CX11x, CX31x, CX710 (Earlier Than V6.03), and CX91x Series Switch Modules V100R001C10 Configuration Guide 12

The documents describe the configuration of various services supported by the CX11x&CX31x&CX91x series switch modules The description covers configuration examples and function configurations.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Displaying Diagnostic Information

Displaying Diagnostic Information

You can use the display commands to view diagnostic information for fault location.


When a fault occurs in the system or during routine maintenance, you can run the display commands to collect the running information about all modules.

Viewing diagnostic information helps locate faults but may affect system performance. For example, CPU usage may become high. Therefore, do not view diagnostic information when the system is running properly.


  • Run:

    display diagnostic-information [ module-name ] &<1-8> [ slot slot-id ] [ file-name ]

    The diagnostic information is displayed.

Updated: 2019-08-09

Document ID: EDOC1000041694

Views: 59715

Downloads: 3623

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next