No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CX11x, CX31x, CX710 (Earlier Than V6.03), and CX91x Series Switch Modules V100R001C10 Configuration Guide 13

The documents describe the configuration of various services supported by the CX11x&CX31x&CX91x series switch modules The description covers configuration examples and function configurations.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Mirroring Configuration

Mirroring Configuration

Packet mirroring copies packets to a specified destination so that you can analyze packets to monitor the network and rectify faults.

  • Switch module 5.13 and later versions do not support remote port mirroring and remote traffic mirroring.
  • The device supports mirroring. The mirroring function is used for network detection and fault management, and may involve personal communication information. Huawei cannot collect or store user communication information without permission. It is recommended that relevant functions used to collect or store user communication information be enabled under applicable laws and regulations. During user communication information usage and storage, measures must be taken to protect user communication information.
Updated: 2019-12-13

Document ID: EDOC1000041694

Views: 80849

Downloads: 3637

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next