Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Mirroring Configuration
Packet mirroring copies packets to a specified destination so that you can analyze packets to monitor the network and rectify faults.
NOTE: - Switch module 5.13 and later versions do not support remote port mirroring and remote traffic mirroring.
- The device supports mirroring. The mirroring function is used for network detection and fault management, and may involve personal communication information. Huawei cannot collect or store user communication information without permission. It is recommended that relevant functions used to collect or store user communication information be enabled under applicable laws and regulations. During user communication information usage and storage, measures must be taken to protect user communication information.
- Overview
This section describes the definition and purpose of mirroring. - Principles
This section describes the mirroring implementation principles. - Configuration Notes
This section describes the mirroring configuration notes. - Configuring Mirroring
This section describes the procedures for configuring mirroring. - Configuration Examples
This section provides several configuration examples of packet mirroring, including network requirements, configuration roadmap, and configuration procedures.
Previous
