No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CX11x, CX31x, CX710 (Earlier Than V6.03), and CX91x Series Switch Modules V100R001C10 Configuration Guide 12

The documents describe the configuration of various services supported by the CX11x&CX31x&CX91x series switch modules The description covers configuration examples and function configurations.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Maintaining MQC

Maintaining MQC

After the traffic statistics function is enabled, you can view traffic statistics to analyze forwarded and discarded packets.

Displaying MQC Statistics

Context

MQC statistics are also traffic policy statistics. To check forwarded and discarded packets in the system, on an interface, or in a VLAN to which a traffic policy has been applied, you can view traffic policy statistics.

To view traffic policy statistics, ensure that MQC and statistics enable have been configured.

Procedure

  • Run the { global [ slot slot-id ] | interface interface-type interface-number | vlan vlan-id } [ policy-name ] [ inbound | outbound ] [ { classifier-base | rule-base } [ class classifier-name ] ] command to check packet statistics in the system, on an interface, or in a VLAN to which a traffic policy has been applied.

Clearing MQC Statistics

Context

MQC statistics are also traffic policy statistics. Before recollecting traffic policy statistics in the system, on an interface, or in a VLAN, run the following command to clear existing packet statistics.

Cleared traffic policy statistics cannot be restored. Exercise caution when you use this command.

Procedure

  • Run the reset traffic-policy statistics { global [ slot slot-id ] | interface interface-type interface-number | vlan vlan-id } [ policy-name ] [ inbound | outbound ] command in the user view to clear statistics on packets matching a traffic policy in the system, an interface, or a VLAN.
Translation
Download
Updated: 2019-08-09

Document ID: EDOC1000041694

Views: 59662

Downloads: 3623

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next