No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CX11x, CX31x, CX710 (Earlier Than V6.03), and CX91x Series Switch Modules V100R001C10 Configuration Guide 12

The documents describe the configuration of various services supported by the CX11x&CX31x&CX91x series switch modules The description covers configuration examples and function configurations.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Maintaining the OPS

Maintaining the OPS

This section describes how to maintain the OPS.

Stopping an OPS Task


The OPS allows you to run the scripts you make. You can stop a script that is running or wait to run.

When you stop a script, subsequent operations specified in the script will not be performed. Exercise caution when you perform this operation.


  1. (Optional) Run the display ops process current command to check running OPS tasks and obtain the ID of the task that you want to stop.
  2. Run the ops stop process process-id command to stop an OPS task.

Uninstalling a Script


You can uninstall unnecessary scripts to release storage space on a device. If an installed script needs to be modified, uninstall it first, and reinstall it after the modification.

  • If a file name is specified, the command uninstalls the specified file. If a directory is specified, the command uninstalls all files in the directory and its subdirectories.

  • This command cannot uninstall a script that has been bound to an assistant. To uninstall the script, unbind it from assistant first.

  • If the script bound to an assistant calls other scripts, the called scripts can be uninstalled using this command. Therefore, it is recommended that you use one script to implement required functions.


  1. Run the ops uninstall file file-name-or-dir command to uninstall a script.
Updated: 2019-08-09

Document ID: EDOC1000041694

Views: 58732

Downloads: 3621

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next