No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CX11x, CX31x, CX710 (Earlier Than V6.03), and CX91x Series Switch Modules V100R001C10 Configuration Guide 12

The documents describe the configuration of various services supported by the CX11x&CX31x&CX91x series switch modules The description covers configuration examples and function configurations.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Maintaining OSPFv3

Maintaining OSPFv3

Maintaining OSPFv3 involve resetting OSPFv3.

Resetting OSPFv3


The OSPFv3 adjacency is removed when you reset the OSPFv3 connection by using the reset ospfv3 command. Exercise caution when running this command.

After modifying the OSPFv3 routing policy or protocol, reset the OSPFv3 connection to validate the modification. To reset OSPFv3 connections, run the following reset ospfv3 command in the user view.


  • To validate the new configuration, run the following commands:

    • reset ospfv3 { process-id | all }

    • reset ospfv3 { process-id | all } counters [ neighbor [ interface-type interface-number ] [ router-id ] ]

    • reset ospfv3 { process-id | all } peer [ interface-type interface-number ] router-id

Updated: 2019-08-09

Document ID: EDOC1000041694

Views: 57945

Downloads: 3621

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next