No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CX11x, CX31x, CX710 (Earlier Than V6.03), and CX91x Series Switch Modules V100R001C10 Configuration Guide 13

The documents describe the configuration of various services supported by the CX11x&CX31x&CX91x series switch modules The description covers configuration examples and function configurations.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Default System Configuration Description

Default System Configuration Description

In the user view, run the display current-configuration command to view the default system configuration.

The command output is described as follows:

  • Time zone synchronized from the management module:
    clock timezone SYNC-ZONE add 08:00:00
  • The Telnet service is disabled:
    telnet server disable
    telnet ipv6 server disable
  • Default aaa user, password (Huawei12#$), and service type (SSH):
    local-user root password irreversible-cipher B.y$!c^=a#ZX2;>2jZ^-o"WQ~'v8AGr5}fU3IsK1UN+"<6KLs4HD;l4+e~L+5Y%`F
    local-user root service-type ssh
  • STP is disabled for ports connected to compute nodes. For example:
    interface 10GE4/1/1
    stp disable
  • The 40GE ports for connecting switch modules are disabled:
    interface 40GE4/18/1
    interface 40GE4/18/2
  • The auto-save function is enabled for switch modules:
    configuration file auto-save
  • The stelnet service is enabled:
    stelnet server enable
    ssh authentication-type default password
  • The serial port authentication mode is password authentication and the default password is Huawei12#$:
    user-interface con 0
    authentication-mode password
    set authentication password cipher Xf{$!p6=a#mc%CJ1$~Q-_6oW4&M\!N&K9(F3IVpSp]H3P^L'HX_E1LOwOy&72$L:9
  • In the VTY view, the authentication mode (aaa), VTY user permission level (15), timeout period (never timeout), number of lines per screen (0), and VTY-supported protocol (SSH) are displayed:
    user-interface vty 0 4
    authentication-mode aaa
    user privilege level 15
    idle-timeout 0 0
    screen-length 0
    protocol inbound ssh
Updated: 2019-12-13

Document ID: EDOC1000041694

Views: 61024

Downloads: 3623

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next