No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CX11x, CX31x, CX710 (Earlier Than V6.03), and CX91x Series Switch Modules V100R001C10 Configuration Guide 12

The documents describe the configuration of various services supported by the CX11x&CX31x&CX91x series switch modules The description covers configuration examples and function configurations.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuration Task Summary

Configuration Task Summary

After PIM (IPv6) is configured, multicast data can be routed and forwarded on an IPv6 network. PIM (IPv6) includes multiple modes that apply to different scenarios.

Table 8-54 lists PIM (IPv6) configuration tasks.

Table 8-54 PIM (IPv6) configuration tasks
Scenario Description Task
Configuring PIM-SM (IPv6)

PIM-SM (IPv6) uses the ASM and SSM models to provide multicast services. In the ASM model, a multicast distribution tree (MDT) is set up by receivers actively joining the multicast group. PIM-SM (IPv6) needs to maintain an RP, set up an RPT, and register with a multicast source. The ASM model applies to the large network where members are widely distributed. In the SSM model, PIM-SM (IPv6) sets up an SPT between a multicast source and members and does not need to maintain an RP, set up an RPT, or register with the multicast source. The SSM model applies to the network where users know the multicast source location and directly order multicast data from a specified multicast source.

Configuring PIM-SM (IPv6)

Configuring Bidir-PIM (IPv6)

Bidir-PIM (IPv6) uses the ASM model to provide multicast services. Similar to the ASM model of PIM-SM (IPv6), Bidir-PIM (IPv6) sets up an MDT by receivers actively joining the multicast group. Bidir-PIM (IPv6) needs to maintain an RP and set up an RPT. On an Bidir-PIM (IPv6) network, the switch modules connected to a user network segment does not switch from the RPT to SPT when receiving multicast data. The RPT is bidirectional, saving forwarding resources on the switch modules when multiple multicast sources exist. Bidir-PIM (IPv6) applies to the network where multiple multicast sources exist, such as multi-party call or video conferences and online games.

Configuring Bidir-PIM (IPv6)

Translation
Download
Updated: 2019-08-09

Document ID: EDOC1000041694

Views: 58066

Downloads: 3621

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next