No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CX11x, CX31x, CX710 (Earlier Than V6.03), and CX91x Series Switch Modules V100R001C10 Configuration Guide 13

The documents describe the configuration of various services supported by the CX11x&CX31x&CX91x series switch modules The description covers configuration examples and function configurations.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuration Task Summary

Configuration Task Summary

This section describes the relationships between NQA configuration tasks.

Configuring Basic NQA Test Functions

You can perform an NQA test by Configuring an NQA Test Instance and Scheduling an NQA Test Instance.

Configuring Extended NQA Test Functions

Configuring the NQA Transmission Delay Threshold and Alarm Threshold, Configuring the Trap Function are extended NQA functions and are optional in NQA configuration. You can configure NQA tests based on test requirements.

Configuring the Trap Function cannot be performed for an ICMP jitter test instance.
Translation
Download
Updated: 2019-12-13

Document ID: EDOC1000041694

Views: 60934

Downloads: 3623

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next