No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CX11x, CX31x, CX710 (Earlier Than V6.03), and CX91x Series Switch Modules V100R001C10 Configuration Guide 12

The documents describe the configuration of various services supported by the CX11x&CX31x&CX91x series switch modules The description covers configuration examples and function configurations.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Maintaining DHCP

Maintaining DHCP

After DHCP configurations are complete, you can clear DHCP statistics and monitor DHCP operation.

Clearing DHCP Statistics

Context

During routine maintenance, you can use the reset commands to clear DHCP statistics.

DHCP statistics cannot be restored after they are cleared. Exercise caution when running the reset commands.

Procedure

  • Run the reset dhcp server statistics command in the user view to clear DHCP server statistics.
  • Run the reset dhcp statistics command in the user view to clear the DHCP message statistics.
  • Run the reset dhcp relay statistics [ server-group group-name ] command in the user view to clear DHCP relay agent statistics.

Clearing the DHCP Address Pool

Procedure

  • Run the reset ip pool name ip-pool-name { start-ip-address [ end-ip-address ] | all | conflict | expired | used } command to reset the configured IP address pool on the device.

Monitoring DHCP Operation

Context

DHCP packet statistics contain only the number of packets received and sent by the DHCP module.

Procedure

  • Run the display dhcp statistics command to view DHCP message statistics.
  • Run the display dhcp relay statistics [ server-group group-name ] command to view statistics on the DHCP Relay Agent.
  • Run the display dhcp server statistics command to view statistics on the DHCP Server.
Translation
Download
Updated: 2019-08-09

Document ID: EDOC1000041694

Views: 58830

Downloads: 3621

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next