No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CX11x, CX31x, CX710 (Earlier Than V6.03), and CX91x Series Switch Modules V100R001C10 Configuration Guide 12

The documents describe the configuration of various services supported by the CX11x&CX31x&CX91x series switch modules The description covers configuration examples and function configurations.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Maintaining Interfaces

Maintaining Interfaces

To view statistics about traffic sent and received on an interface within a period, first clear existing traffic statistics on the interface.

Clearing Interface Traffic Statistics


To monitor the status of an interface or locate faults on the interface, collect traffic statistics on the interface. Before collecting traffic statistics on an interface within a period, clear the existing traffic statistics on this interface.

Interface statistics cannot be restored after they are cleared. Confirm your action before you perform the operations.


  • Run the reset interface counters [ interface-type [ interface-number ] ] command to clear the interface statistics.
Updated: 2019-08-09

Document ID: EDOC1000041694

Views: 59252

Downloads: 3623

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next