No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CX11x, CX31x, CX710 (Earlier Than V6.03), and CX91x Series Switch Modules V100R001C10 Configuration Guide 12

The documents describe the configuration of various services supported by the CX11x&CX31x&CX91x series switch modules The description covers configuration examples and function configurations.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Applications

Applications

This section describes OPS applications.

Automatic Deployment of Unconfigured Devices

As shown in Figure 3-34, SwitchA has no configuration file. After SwitchA is powered on, it obtains the IP address of the script file server from the DHCP server and downloads a Python script from the script file server. The OPS on SwitchA then runs the Python script to download the system software and configuration file. After that, SwitchA restarts with the system software and configuration file, and the automatic deployment is complete.
Figure 3-34 Unconfigured Device deployment by running a Python script on the OPS
Translation
Download
Updated: 2019-08-09

Document ID: EDOC1000041694

Views: 58622

Downloads: 3621

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next