No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CX11x, CX31x, CX710 (Earlier Than V6.03), and CX91x Series Switch Modules V100R001C10 Configuration Guide 12

The documents describe the configuration of various services supported by the CX11x&CX31x&CX91x series switch modules The description covers configuration examples and function configurations.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Maintaining RIP

Maintaining RIP

RIP maintenance includes resetting RIP connections and clearing RIP statistics.

Resetting RIP

Context

The RIP neighbor relationship is deleted after you reset RIP connections with the reset rip command. Exercise caution when running this command.

To reset RIP connections, run the following reset commands in the user view.

Procedure

  • Run the reset rip { process-id | all } configuration command to reset the system parameters of a RIP process. When a RIP process restarts, all the parameters of the process retain the default values.

Clearing RIP Statistics

Context

RIP information cannot be restored after it is cleared. Exercise caution when running the commands.

To clear RIP statistics, run the following reset commands in the user view.

Procedure

  • Run the reset rip { process-id | all } imported-routes command to clear the routes imported from other routing protocols, including dynamic routes and direct routes, and import the routes to RIP again.
  • Run the reset rip { process-id | all } statistics command to clear the counters of a RIP process. This command is used to recount statistics during debugging.
Translation
Download
Updated: 2019-08-09

Document ID: EDOC1000041694

Views: 58665

Downloads: 3621

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next