Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Default Configuration
This section provides the default configuration of multicast route management (IPv6).
Table 8-94 lists the default configuration of multicast route management (IPv6).
Table 8-94 Default configuration of multicast route management (IPv6)
| Parameter | Default Setting |
|---|---|
IPv6 multicast load splitting |
Not configured. If multiple equal-cost optimal routes are found in RPF check, the system selects the route with the largest next-hop address as the RPF route. |
IPv6 multicast boundary |
Not configured. |
Previous
