No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CX11x, CX31x, CX710 (Earlier Than V6.03), and CX91x Series Switch Modules V100R001C10 Configuration Guide 12

The documents describe the configuration of various services supported by the CX11x&CX31x&CX91x series switch modules The description covers configuration examples and function configurations.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Default Configuration

Default Configuration

This section describes the default configuration of IPv6 IS-IS, which can be changed according to network requirements.

Table 7-46 describes the default configuration of IPv6 IS-IS.

Table 7-46 Default configuration of IPv6 IS-IS
Parameter Default Configuration
IS-IS Disabled
DIS priority 64
Device level Level-1-2
Interval for sending Hello packets 10s
Minimum interval for sending LSPs 50ms
Maximum number of LSPs to be sent 10
Interval for updating LSPs 900s
Maximum lifetime of LSPs 1200s
Bandwidth reference value 100Mbit/s
Updated: 2019-08-09

Document ID: EDOC1000041694

Views: 57136

Downloads: 3617

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next