No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CX11x, CX31x, CX710 (Earlier Than V6.03), and CX91x Series Switch Modules V100R001C10 Configuration Guide 12

The documents describe the configuration of various services supported by the CX11x&CX31x&CX91x series switch modules The description covers configuration examples and function configurations.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Introduction to Traffic Statistics

Introduction to Traffic Statistics

MQC is used to implement traffic statistics.

After MQC is used to implement traffic statistics, the device collects statistics on packets matching traffic classification rules. The statistics on forwarded and discarded packets matching a traffic policy help you check whether the traffic policy is correctly applied and locate faults.

You can run the display traffic-policy statistics command to view the statistics on forwarded and discarded packets matching a traffic policy only after MQC is used to implement traffic statistics.

Table 13-17 describes the differences between traffic statistics and interface statistics.
Table 13-17 Differences between traffic statistics and interface statistics

Statistics Collection Mode

Display Command

Range

Remarks

Traffic statistics

display traffic-policy statistics

Packets matching traffic classification rules after a traffic policy is applied

The packets do not include packets sent to the CPU.

Interface statistics

display interface

All packets on an interface

The packets include packets sent to the CPU.

Translation
Download
Updated: 2019-08-09

Document ID: EDOC1000041694

Views: 57484

Downloads: 3619

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next