No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CX11x, CX31x, CX710 (Earlier Than V6.03), and CX91x Series Switch Modules V100R001C10 Configuration Guide 12

The documents describe the configuration of various services supported by the CX11x&CX31x&CX91x series switch modules The description covers configuration examples and function configurations.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuration Notes

Configuration Notes

This section describes notes on configuring multicast VLAN replication.

Note the following when configuring multicast VLAN replication on the switch modules:

  • Because multicast VLAN replication is a Layer 2 multicast feature, all the multicast VLAN replication configurations on interfaces mentioned in this chapter are performed on Layer 2 physical interfaces, including Eth-Trunk interfaces.

  • It is recommended that you set a proper TTL value for multicast data packets sent from a multicast source, to ensure that the TTL value is larger than 1 when the device receives the packets from the multicast VLAN. Otherwise, the multicast data packets may fail to be forwarded to user VLANs.

Translation
Download
Updated: 2019-08-09

Document ID: EDOC1000041694

Views: 58512

Downloads: 3621

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next