No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CX11x, CX31x, CX710 (Earlier Than V6.03), and CX91x Series Switch Modules V100R001C10 Configuration Guide 12

The documents describe the configuration of various services supported by the CX11x&CX31x&CX91x series switch modules The description covers configuration examples and function configurations.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Maintaining NTP

Maintaining NTP

In the maintenance of NTP, NTP packets are cleared, and the running status of NTP is monitored.

Monitoring the Running Status of NTP

Context

To monitor the NTP running status after configurations of NTP are complete, run the following commands in any view.

Procedure

  • Run:

    display ntp statistics packet [ [ ipv6 ] interface { interface-type interface-number | all } | peer [ [ ip-address [ vpn-instance vpn-instance-name ] ] | ipv6 [ ipv6-address [ vpn-instance vpn-instance-name ] ] ] ]

    The statistics on NTP packets or symmetric peers are checked.

  • Run:

    display ntp slot-status

    The status of the clock system on a device is checked.

  • Run:

    display ntp status

    Check the status information of NTP.

  • Run:

    display ntp sessions [ verbose ]

    All session information maintained by the local NTP service is checked.

  • Run:

    display ntp trace

    The path from the local device to the reference clock source is checked.

  • Run:

    display ntp event clock-unsync

    The last 10 clock unsynchronization reasons are checked.

Translation
Download
Updated: 2019-08-09

Document ID: EDOC1000041694

Views: 59665

Downloads: 3623

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next