No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CX11x, CX31x, CX710 (Earlier Than V6.03), and CX91x Series Switch Modules V100R001C10 Configuration Guide 12

The documents describe the configuration of various services supported by the CX11x&CX31x&CX91x series switch modules The description covers configuration examples and function configurations.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuration Task Summary

Configuration Task Summary

After basic RIPng functions are configured, you can build a Layer 3 network using the RIPng protocol. If other RIPng functions are required, configure them according to reference sections.

Table 7-10 describes the RIPng configuration tasks.

Table 7-10 RIPng configuration tasks




Configuring basic RIPng functions

Basic RIPng functions include enabling RIPng and enabling the RIPng process on interfaces. The basic RIPng functions must be configured before you use the RIPng features.

Configuring Basic RIPng Functions

Preventing routing loops

RIPng is a routing protocol based on the distance vector algorithm. RIPng devices advertise their local IPv6 routing tables to neighbors, so routing loops may occur.

RIPng uses split horizon and poison reverse to prevent routing loops:
  • Split horizon: A route learnt by RIPng from an interface is not sent to neighbors from the interface. This reduces bandwidth consumption and prevents routing loops.
  • Poison reverse: RIPng sets the cost of a route learnt from an interface to 16 (an unreachable route), and sends the route to neighbors through the interface. In this way, RIPng can delete useless routes from the neighbor routing table and prevent routing loops.

Avoiding Routing Loops

Controlling RIPng routing

To use RIPng more flexibly on the existing network and meet various user requirements, you can configure different parameters to control RIPng routing.

Controlling RIPng Routing

Controlling the advertising and receiving of RIPng routes

In practical applications, to meet network requirements, you can configure different parameters to accurately control the advertising and receiving of RIPng routes.

Controlling RIPng Route Advertisement

Improving RIPng network performance

In practical applications, you can configure special RIPng functions to improve RIPng network performance.
  • Adjusting the value of the RIPng timer to change the RIPng network convergence rate.
  • Adjusting the number and interval of Update packets sent by the interface to reduce device resource and network bandwidth consumption.
  • Checking the zero fields in RIPng packets to meet network requirements for high security.

Improving RIPng Network Performance

Updated: 2019-08-09

Document ID: EDOC1000041694

Views: 58445

Downloads: 3621

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next