No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CX11x, CX31x, CX710 (Earlier Than V6.03), and CX91x Series Switch Modules V100R001C10 Configuration Guide 12

The documents describe the configuration of various services supported by the CX11x&CX31x&CX91x series switch modules The description covers configuration examples and function configurations.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuration Notes

Configuration Notes

This section describes the notes about configuring a stack.

To set up a stack, pay attention to the following points:
  • Use Huawei-certified optical or cable modules. Non-Huawei-certified optical or cable modules cannot ensure transmission reliability and may affect service stability. Huawei is not liable for any problem caused by non-Huawei-certified optical or cable modules and will not fix such problems.

  • Switches of different models cannot set up a stack. For example, CX910 switch module 10GE switching planes and CX110 switch module GE switching plane cannot set up a stack.

Translation
Download
Updated: 2019-08-09

Document ID: EDOC1000041694

Views: 59154

Downloads: 3623

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next