No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CX11x, CX31x, CX710 (Earlier Than V6.03), and CX91x Series Switch Modules V100R001C10 Configuration Guide 12

The documents describe the configuration of various services supported by the CX11x&CX31x&CX91x series switch modules The description covers configuration examples and function configurations.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuration Task Summary

Configuration Task Summary

This section describes MSDP configuration tasks.

Table 8-79 lists MSDP configuration tasks.

Table 8-79 MSDP configuration tasks




Configure basic MSDP functions

When a PIM-SM network is divided into multiple PIM-SM domains, configure basic MSDP functions on the multicast switch modules to allow the RP in each domain to learn information about multicast sources in other domains and members in each domain to receive multicast data from multicast sources in other domains.

Configuring Basic MSDP Functions

Configure the control over SA messages and the SA cache

MSDP peers share (S, G) information by exchanging SA messages. To control SA messages in actual applications, configure the control over SA messages and the SA cache.

Controlling SA Messages and the SA Cache

Configure MSDP anycast RP

MSDP anycast RP allows multicast sources to register with the closest RP and allows receivers to join the closest RP. This releases burdens on a single RP, implements RP backup, and optimizes the forwarding path.

Configuring MSDP Anycast RP
Updated: 2019-08-09

Document ID: EDOC1000041694

Views: 58000

Downloads: 3621

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next