No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CX11x, CX31x, CX710 (Earlier Than V6.03), and CX91x Series Switch Modules V100R001C10 Configuration Guide 12

The documents describe the configuration of various services supported by the CX11x&CX31x&CX91x series switch modules The description covers configuration examples and function configurations.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Displaying Interface Status

Displaying Interface Status

You can use the display commands to view the configuration and status of a specified interface.

Context

View the configuration of an interface.

  • After performing operations in a interface view, you can view the configuration about this interface to check whether the configuration is correct.

View the status of an interface.

  • You can view the status of an interface to monitor the interface or locate interface faults.

Procedure

  • View the configuration of a specified interface.
    1. Run:

      system-view

      The system view is displayed.

    2. Run:

      interface interface-type interface-number

      The interface view is displayed.

    3. Run:

      display this

      The configuration of the current interface is displayed.

  • View the status of an interface using either of the following methods.

    Method 1:

    1. Run:

      display interface [ interface-type [ interface-number ] ]

      The status of the specified interface is displayed.

    Method 2:

    1. Run:

      system-view

      The system view is displayed.

    2. Run:

      interface interface-type interface-number

      The interface view is displayed.

    3. Run:

      display this interface

      The status of the specified interface is displayed.

Translation
Download
Updated: 2019-08-09

Document ID: EDOC1000041694

Views: 59825

Downloads: 3623

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next