No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CX11x, CX31x, CX710 (Earlier Than V6.03), and CX91x Series Switch Modules V100R001C10 Configuration Guide 12

The documents describe the configuration of various services supported by the CX11x&CX31x&CX91x series switch modules The description covers configuration examples and function configurations.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the CX311 to Connect to the FCoE Gateway

Configuring the CX311 to Connect to the FCoE Gateway

This topic describes default configuration of the fibre channel over Ethernet (FCoE) feature. When the switch module is the CX311, the FCoE features are configured upon the CX311 startup. You can use a optical fiber to connect the CX311 (through eight FC optical ports on the panel) and the disk array (storage network) and configure the disk array to enable access from a front compute node to the storage network.

Updated: 2019-08-09

Document ID: EDOC1000041694

Views: 59764

Downloads: 3623

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next