No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CX11x, CX31x, CX710 (Earlier Than V6.03), and CX91x Series Switch Modules V100R001C10 Configuration Guide 12

The documents describe the configuration of various services supported by the CX11x&CX31x&CX91x series switch modules The description covers configuration examples and function configurations.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Default Configuration

Default Configuration

This section describes the default STP/RSTP configuration. You can change the configuration based on actual needs.

Parameter

Default Setting

Working mode

MSTP

STP/RSTP status

STP/RSTP is enabled globally and on an interface.

Switching device priority

32768

Port priority

128

Algorithm used to calculate the default path cost

dot1t, IEEE 802.1t

Forward Delay Time

1500 centiseconds

Hello Time

200 centiseconds

Max Age Time

2000 centiseconds

Translation
Download
Updated: 2019-08-09

Document ID: EDOC1000041694

Views: 59432

Downloads: 3623

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next