No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CX11x, CX31x, CX710 (Earlier Than V6.03), and CX91x Series Switch Modules V100R001C10 Configuration Guide 12

The documents describe the configuration of various services supported by the CX11x&CX31x&CX91x series switch modules The description covers configuration examples and function configurations.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Use Scenario

Use Scenario

This section describes AAA use scenarios.

Deploying AAA for Internet Access Users

Figure 12-17 AAA deployment for Internet access users

As shown in Figure 12-17, an enterprise network connects to the Switch Module through LAN Switch. Users on the enterprise network need to connect to the Internet. To ensure network security, the administrator controls the Internet access rights of the users.

The administrator configures AAA on the Switch Module to allow the Switch Module to communicate with the AAA server. The AAA server then can manage users centrally. After a user enters the user name and password on the client, the Switch Module forwards the authentication information including user name and password to the AAA server, and the AAA server authenticates the user. After being successfully authenticated, the user can access the Internet. The AAA server also records the network resource usage of the user.

Two AAA servers can be deployed in active/standby mode to improve reliability. When the active server fails, the standby one takes over the AAA services, ensuring uninterrupted services.

Deploying AAA for Management Users

As shown in Figure 12-18, the management user (Admin) connects to the Switch Module to manage, configure, and maintain the Switch Module.

After the management user logs in to the Switch Module with AAA configured, the Switch Module sends the user name and password of the user to the AAA server. The AAA server then authenticates the user and records the user operations.

Figure 12-18 AAA deployment for management users

Updated: 2019-08-09

Document ID: EDOC1000041694

Views: 57899

Downloads: 3621

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next