Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Default Configuration
This section describes the default configuration of OSPF, which can be changed according to network requirements.
Table 7-29 describes the default configuration of OSPF.
Table 7-29 Default configuration of OSPF
| Parameter | Default Setting |
|---|---|
| OSPF | Disabled |
| The interval of sending Hello packets | By default, for the interface of P2P and Broadcast type, the interval for sending Hello packets is 10 seconds; for the interface of P2MP and NBMA type, it is 30 seconds. |
| The dead interval of the OSPF neighbor | By default, for the interface of P2P and Broadcast, the dead interval for the OSPF neighbors is 40 seconds; for that of P2MP and NBMA, it is 120 seconds. |
| The period during which a device keeps acting as a stub router. | 500 seconds. |
| The bandwidth reference value used to calculate the link cost. | 100 Mbit/s |
Previous
