No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CX11x, CX31x, CX710 (Earlier Than V6.03), and CX91x Series Switch Modules V100R001C10 Configuration Guide 12

The documents describe the configuration of various services supported by the CX11x&CX31x&CX91x series switch modules The description covers configuration examples and function configurations.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Overview

Overview

Traffic policing, traffic shaping, and interface-based rate limiting limit the traffic by monitoring the rate limit to improve network resource use efficiency and provide better services.

If the transmit rate is larger than the receive rate or the rate of an interface on a downstream device is lower than the rate of an interface on an upstream device, traffic congestion may occur. A network will be congested if traffic sent by users is not limited. To make use of limited network resources and provide better user services, limit the user traffic.

Traffic policing, traffic shaping, and interface-based rate limiting limit traffic and resources used by the traffic by monitoring the traffic rate.

Traffic Policing

Traffic policing discards excess traffic to limit the traffic within a specified range and to protect network resources as well as carriers' interests.

Traffic Shaping

Traffic shaping adjusts the traffic rate to make irregular traffic transmitted at an even rate, preventing traffic congestion on the downstream device.

Interface-based Rate Limiting

Interface-based rate limiting limits the rate of all packets sent or received on an interface. When the device needs to limit the rate of all traffic on an interface without differentiating the packet type, interface-based rate limiting simplifies the configuration.

Translation
Download
Updated: 2019-08-09

Document ID: EDOC1000041694

Views: 58605

Downloads: 3621

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next