No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CX11x, CX31x, CX710 (Earlier Than V6.03), and CX91x Series Switch Modules V100R001C10 Configuration Guide 12

The documents describe the configuration of various services supported by the CX11x&CX31x&CX91x series switch modules The description covers configuration examples and function configurations.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Memory Usage Alarm Threshold

Configuring the Memory Usage Alarm Threshold

You can configure the memory usage alarm threshold to monitor memory usage.

Context

Memory usage is an important indicator to evaluate device performance. A high memory usage will cause service faults. During data processing, if the device can generate an alarm when high memory usage occurs, you can effectively monitor memory usage and optimize system performance to ensure system stability.

  • Memory usage alarm threshold

    When memory usage reaches this threshold, the system generates an alarm.

  • Memory usage alarm recovery threshold

    When memory usage falls within this threshold, the system generates a clear alarm.

Procedure

  1. (Optional) Run:

    display memory threshold [ slot slot-id ]

    The memory usage configuration is displayed.

  2. Run:

    system-view

    The system view is displayed.

  3. Run:

    set memory threshold threshold-value [ restore restore-threshold-value ] [ slot slot-id ]

    The memory usage alarm threshold and memory usage alarm recovery threshold are set.

    By default, the memory usage alarm threshold is 95% and the memory usage alarm recovery threshold is 75%.

  4. Run:

    commit

    The configuration is committed.

Translation
Download
Updated: 2019-08-09

Document ID: EDOC1000041694

Views: 58859

Downloads: 3621

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next