No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CX11x, CX31x, CX710 (Earlier Than V6.03), and CX91x Series Switch Modules V100R001C10 Configuration Guide 12

The documents describe the configuration of various services supported by the CX11x&CX31x&CX91x series switch modules The description covers configuration examples and function configurations.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Applicable Scenario

Applicable Scenario

This section describes the applicable scenario of redirection.

Application of Redirection

Networking Requirements

As shown in Figure 13-35, servers in the service area need to access the Internet. To prevent attacks and ensure network and data security, packets need to be redirected to the firewall.

Figure 13-35 Networking of redirection

Service Deployment

  • Configure a traffic classifier to match all packets.
  • Configure a traffic behavior to redirect matching traffic to the firewall.
  • Configure a traffic policy, bind the traffic policy to the traffic classifier and traffic behavior, and apply the traffic behavior to the inbound direction of SwitchA so that all traffic from the Internet is redirected to the firewall.
Updated: 2019-08-09

Document ID: EDOC1000041694

Views: 57853

Downloads: 3621

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next