No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CX11x, CX31x, CX710 (Earlier Than V6.03), and CX91x Series Switch Modules V100R001C10 Configuration Guide 12

The documents describe the configuration of various services supported by the CX11x&CX31x&CX91x series switch modules The description covers configuration examples and function configurations.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuration Task Overview

Configuration Task Overview

You can set the switch module working modes, fault detection status, and use the basic functions of Smart Channels.

Table 11-29 describes the configuration tasks.

Table 11-29 Smart Channel configuration overview




Set the switch module working mode.

You can set the switch module working mode to the Switch or Channel mode.

Setting the Switch Module Working Mode

Set the fault detection status.

You can enable fault detection so that blades can detect Smart Channel link faults and automatically switch over traffic.

Setting the Fault Detection Status

Use the basic functions of a Smart Channel.

You can create a Smart Channel, add ports to a Smart Channel, set the switchover delay time, and use other basic functions.

Using Basic Functions

Updated: 2019-08-09

Document ID: EDOC1000041694

Views: 57407

Downloads: 3619

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next